معايير حياکة أقمشة الإنترلوک المنتجة من ألياف الفسکوز المخلوط بالبولى إستر والإسباندکس Standards for sewing interlock fabrics produced from viscose fibers mixed with polyester and spandex

نوع المستند : بحوث علمية محکمة

المؤلف

مدرس بقسم الملابس والنسيج - بکلية الاقتصاد المنزلى – جامعة الأزهر.

المستخلص

احتلت صناعة التريکو مکانة مرموقة فى مجال صناعة الملابس والنسيج، ويرجع ذلک لأسباب عديدة أهمها الإنتاجية الکبيرة، وقلة العمالة المطلوبة للتشغيل، وتقدم صناعة ماکينات التريکو الذى أدى إلى التنوع فى الإنتاج، بالإضافة إلى تطورإنتاج الألياف التحويلية والصناعية الذى ساعد على إکساب أقمشة التريکو مميزات تفوق مثيلاتها المنسوجة، کالمرونة والإستطالة العالية ومقاومة الکرمشة، ونظراً لما تتميز به أقمشة التريکو من خواص التمدد والمطاطية فهى تحتاج إلى عناية خاصة عند حياکتها من حيث اختيار نوع وصلة الحياکة ونوع وکثافة             غرزة الحياکة.
ولذا فقد هدف البحث إلى دراسة تأثير اختلاف کلاً من نوع وصلة الحياکة ونوع وکثافة غرز الحياکة على جودة حياکة أقمشة الإنترلوک المنتجة من ألياف الفسکوز المخلوط بالبولى إستر والإسباندکس بنسبة خلط (رايون الفسکوز بنسبة 77.5%، البولى إستر 17.5%، الإسباندکس 5%)، ولتحقيق هذا الهدف تم إنتاج عدد 18 عينة بها ثلاثة أنواع من وصلات الحياکة وهى الوصلة المتراکبة SSa بغرزة الأوفرلوک 4 فتلة وغرزة الأوفرلوک 5 فتلة عند ثلاث مستويات من کثافة الغرز فى وحدة القياس، کما تم إنتاج الوصلة المتداخلة LSq-2 بکل من غرزة الأوفرلوک 4 فتلة وغرزة الأوفرلوک 5 فتلة عند ثلاث مستويات من کثافة الغرز فى وحدة القياس، بالإضافة إلى إنتاج الوصلة المتداخلة LSq-3 بکل من غرزة الأوفرلوک 4 فتلة وغرزة الأوفرلوک 5 فتلة عند ثلاث مستويات من کثافة الغرز فى وحدة القياس.
وتم إجراء الاختبارات المعملية لعينات البحث وهى (قوة شد الحياکة – إستطالة الحياکة – سمک الحياکة – مظهرية الحياکة – صلابة الحياکة)، وباستخدام المعاملات الإحصائية لتحليل النتائج تم الوصول إلى أن العينة الرابعة (وصلة حياکة SSa، وغرزة حياکة 514، وکثافة غرز 4/سم) هى الأفضل بمعامل جودة 84%.
Abstract
The knitting industry occupied high position in the clothing and textile industry, due to many reasons including the large productivity and the lack of labor required for operation, and the advances of knitting machines industry, which led to various production,  In addition to the development of the production of regenerated fibers and synthetic fibers, which helped to give knitted fabrics some important properties such as flexibility, high elongation and wrinkle resistance, due to the stretching and elasticity properties of knitted fabrics, special care must be taken during sewing, by choosing the suitable type of seam, stitch and density.
The research aimed to study the effect of different types of seam type and stitch type & density on the quality of interlock fabrics produced from viscose fibers mixed with polyester and spandex(viscose rayon 77.5%, polyester, 17.5%, spandex 5%), and to achieve this goal 18 samples were produced with three types of seams, which are (the SSa seam with 514 overlock stitch and 516 overlock stitch) at three levels of stitch density, (the LSq-2 seam with 514 overlock stitch and 516 overlock stitch) at three levels of stitch density, and (the LSq-3 seam with 514 overlock stitch and 516 overlock stitch) at three levels of stitch density.
Laboratory tests were performed for the research samples (seam strength - seam elongation - seam thickness - seam appearance - seam stiffness), by using statistical analysis to analyze the results, it was found that the fourth sample (SSa 514 overlock stitch, and stitch density 4 / cm) was the best with a quality factor of 84%.

الكلمات الرئيسية

الموضوعات الرئيسية